Showing posts with label board fixing. Show all posts
Showing posts with label board fixing. Show all posts

Monday, August 2, 2010

New GoPro Mount, waves and new challenges - 60 Days of Summer Day 24

I woke up this morning and could not believe that it was August already, the time is flying. I also realised that my foot was rather sore; I had cut it on my fin yesterday. The forecast of 20 knots and 7 ft wind waves looked promising and I had arranged to go sailing with my buddy Marc at Sprecks.

Plenty of duck tape later my foot was ready to hit the water. It was such a joy to be on super light kit today after two weeks of being maxed out on big heavy sails. There were some fun waves on the Camp One reef and while my 4.5m Bolt was a little small for jumping it was great fun to be in some swells and getting some backside rides.

The sun was shining, the wind blowing and the waves somewhat peeling but one problem, my right foot! The cut on my right foot was rubbing too much and it was super painful to do anything particularly when in the front strap. I tried to loosen the strap but that didn’t seem to change anything, I was OKish riding with it in the back but I knew what the real solution was and it wasn’t long before I limped back to shore and packed my gear. It was only then that I realised just how painful my foot was and I was rather angry at myself because I should have known better and sat out for the day, the waves have just been too tempting! Tomorrow I will have to stay off the water and likely avoid running or walking much too. Maybe I’ll hit some golf balls but I want to be super careful in the hope that I can get back on the water after just one missed day. GUTTED!

Before I went on the water I tried out a new mount on Marc’s gear and on review I am really pleased with the new angle and when I am back sailing and we have some conditions it will hopefully produce some good shots. I do need to solve the water droplets issue and will try the RainX solution.

I used a mix of bits from the bike seat post and roll bar mounts. It attached to the mast about 6 inches about the boom and facing towards the sailor in a portrait orientation. We had the camera at a slight angle, you really need to try to think about the sailor, sail and board positions while sailing to ensure that you get the shot you want. We realised later that we should have rotated it into landscape for the video footage.

This will be a great angle and I look forward to trying it!

I really like landing shots with tons of spray. Can't wait to get this to Ho'okipa. Thanks Marc for your camera work today.

With the racing finished and the wind blowing hard one of my next challenges will be too see if I can break 40 knots on a windsurf board. Last year I had one day on a slalom board (the same one I used for the racing) and a 6.0 and managed 33 something. This year I have a F2 Missile to fix and I know that can go REALLY fast in the right hands. The board does have a few issues but nothing a grinder and some resin cannot fix. While 40 knots does not seem fast by modern day speed sailing terms we do not have a proper speed course here, we just have the inside of the Camp One reef and you sometimes get a flattish section between the waves so getting fast times is really hard (and scary!). There are some MauiVMAX days in the pipeline for August so that should help. I will be spending a lot more time in the waves too and I cannot wait to get back into my normal habitat.

66 litres of pure speed! I think that the smaller size will really help me becuase with my lack of weight I find it hard to keep the board on the water when it gets super over powered.

Sailing record (for now) 100% (23/23 days)


More to follow…

Wednesday, July 21, 2010

60: Day 12 – GoPro Update, Board Fixing Memories & GPS Speed

Board Fixing Memories - As I woke this morning my first port of call was to check the quality of my night laminating and that brought back many memories. When I was in my teens and early twenties I used to live in a house in Paia (I think that in those days there wasn’t a windsurfer who had not at some point lived in a Bliss house) with a bunch of guys and the odd brave girl. Each evening the backyard was full of broken boards, ripped sails, resin, bits of glass, sometimes the odd bit of prized carbon (which we used to get from the Sailboards Maui dumpsters up the road) and the swoosh swoosh sound of sandpaper on glass filled the air. We had to get our boards fixed up enough to get them on the water the next day and no job was too big or too small. If it rained and much to John’s (the house owner) disgust the fixing had to move inside. Phil Baker was the oracle; if you needed advice on how to fix something he’d be your man and even if you didn’t need help he spent hours standing by helping people get there stuff back together (he once fixed a board using a used cereal box!). We fixed cracks, we put in mast tracks, fin boxes and even put snapped boards back together all in the dirty, dusty and windy back yard. One of more interesting memories was fixing my K-bay which I had put on the rocks (the one with the swallow tail for those of you who remember), suddenly I heard lots of shouting and screaming, I looked up to see a full FBI swat team storming our neighbours’ house - that was rather shocking!


Don't worry Phil will fix it! I got this Quatro for 50 Bucks and without a mast track but it went on to be one of my favourite boards ever!
Fast forward 15 years and much has changed but much hasn’t. Paia is rather safer, well if you stay clear of Charley’s, Phil has lots of kids so he has a little less time to help people with their fixes but he is still ever present if you need advice but I am still fixing my broken boards in my back yard rather than in a proper work space but, I am pleased to report that all that training in my youth must have paid off and the glass job that I did last night seems to have been good and after some time under the sander (ok some things have changed) my trusty Tabou was ready to hit the water, it will need some filler and paint but it is back on the water.

Today’s Wind and Waves – Everyone was ampted about today, we had all had such a fun day yesterday and I had hoped to get some video footage but, the conditions were far from optimal. It started windy and there were a few waves rolling into Ho’okipa but as we rigged high clouds came over and the wind started a downward trend. I looked out and saw a few people ripping and was encouraged - later it turned out to be Jason Prior that was making it look good and he could make Camber Sands in a Northerly look good. By the time I was on the water there was virtually no wind and combined with the sluggish trade swell it wasn’t the best of sessions but enough to keep my 100% record and that is important. There was plenty of wind for slalom later on but I took the decision to relax on baby beach with friends, I have sailed alot in the last 10 days or so and my hands and ankles in particular are a littel sore. Later in the day I went for the 7km Kanaha and back run and set a new course PB of 36 minutes 43 seconds, I am hoping to improve on this in the coming weeks.

To GoPro or not to GoPro? UPDATE – in an early post I asked this question and want to add some further info for those still considering buying a GoPro camera to capture their sessions. Cost is always an issue with any purchase and at first look the camera look quite reasonable, the HD Wide Angle Naked (this is the best of the cameras) which comes with no mounts retails at $259.99 + tax and shipping but you must consider the extras that you will need before you commit because if you don’t you will be disappointed.

  • SD memory card preferably 8GB or more (max 32GB): $50 (for 8GB)
  • Handlebar Seatpost Mount (for boom mounts): $19.99
  • Roll Bar Mount (for mast mounts): $29.99
  • Grab Bag of Mounts: $19.99
  • Surf Hero Expansion: $19.99
  • Anti-Fog Inserts: $14.99
Total: $414.94

At $14.99 the Anti-Fog inserts are possibly the most important pieces of the puzzle and do not go without them!

If you are happy with that outlay then that is a good first step but buying the gear will not guarantee you success. I have had a few people come up and ask me about the cameras and how I am getting on, one guy said to me;

“Is that new?”

“Yes” I replied,

“Arhh, yes they are always new – people get fed up with them and then don’t use them anymore so they are always new!”

I am keen to prove this guy wrong and strongly feel that they have a place and that many people can get enjoyment and from capturing and sharing their sessions. Once you have got your gear sorted and I urge you to do this immediately when you purchase the camera is this will not only save shipping but lots of frustration you then need to work hard at first to get good pictures, you are unlikely to get a good shot straight away and you will wade through hundreds and very quickly thousands of photos and hours of video until you get the desired result.

My top ten things that you should remember;
  1. Buy all the stuff listed above at the time of buying your camera
  2. Have a medium Phillips style (cross head) screw driver at hand
  3. Don’t assemble your mount on sand – I dropped a screw and had a hard time finding it!
  4. Use the screwdriver to tighten the mounts but don’t do it too tight, make sure that on impact it can move, that way you protect your camera
  5. Try lots of different mounts and mounting positions but don’t spend to long changing during each session.
  6. Ignore all negative comments from onlookers
  7. If at first you fail, evaluate why you failed then seek to improve next time
  8. Be ruthless with your editing; if it is not perfect delete it. You are better to have one good shot from each session or one small clip of video rather than a ton of so so images and video.
  9. Share your results on Facebook, everyone loves the pics, especially non-windsurfers and surfers, one friend said to me after watching a headcam video “Now I can see why you like windsurfing, this video let me ride with you – I want to learn”
  10. Remember why you bought a GoPro in the first place and keep going
GPS Speed – Picked up my GT-31 and Aquapak today (thanks Hammer) for sorting that for me, all I have to do now is set it up and put some tracks down and see if I can climb up the Maui VMax 2010 Speed Ladder. I will of course air my trials and tribulations in due course.



Check out this link for some useful Info: http://www.gps-speed.co.uk/gps-speed-windsurf_navi_gt31.html
More to follow…